JESCO MACHINERY LTD.

Advanced Design Rugged Construction
Lionet Gives You the Ultimate in Precision Turning

8-STATION TURRET (STANDARD) •The Lionet series CNC lathe is equipped with an 8-station turret as standard. •12-station and VDI 8/12-station turret are optional. •The turret employs bi-directional, shortest route tool selection.
	DIRECTLY COUPLED AC SERVO DRIVE •The x-axis is driven by a AC servo motor directly coupled with pretensioned ball screw for dependable feeding accuracy on eliminating backlash. •Linear guide ways on the bed provides high speed traverse rate.
Standard Accessories: FAGOR 8055i/A-TC Contorl & sercos servo system Hydraulic Tailstock Automatic Lubrication in Linear Guide Ways & Ball Screws Cutting Fluid Coolant System Chip Conveyor with Cart Hydraulic 8 Station Turret, 2 x Facing Toolholders, 8 x Tool Clamping wedges, 2 x Boring Bar Toolholders, 1 Set of Boring Bar Bushes Halogen Lamp RS-232 Port Hydraulic Hollow Chuck w/1 set of Hard & Soft Jaws or Hydraulic Collect Chuck but without collects Warning Light Leveling Blocks Centers and Center Sleeve Service Tools & Toolbox Operation, Programming & Instruction Manuals Control System 1-year warranty service, 1-year mechanical parts warranty Full CE compliance
Optional Accessories: FANUC 0i-T Control/SIEMENS 810D Control Set of Soft Jaws for Chuck Auto. Parts catcher Automatic door Programmable auto. Tool probe Boring bar holder Boring bar bushes Facing tool holder VDI turret Face (excluding toolholders) Bar feeder including interface High pressure coolant Heavy Duty Rolling Center C-Axis and Power Turret Programming Tailstock

CAPACITY AND SPECIFICATION

Unit:mm(inch)

MODELS	LT-05	LT-06	LT-08
Swing over bed	300mm(11.81")	380mm(14.96")	560mm(22.04")
Max cutting diameter	230mm(9.05")	320mm(12.6")	460mm(18.11")
Spindle nose	A2-5	A2-6/ A2-8	A2-8
Spindle bore diameter	58mm(2.28")	62mm(2.44")/87mm(3.43")	87mm(3.42")/102mm(4")-OPT
Spindle speed	6000rpm	4500rpm/3500rpm-OPT	3500rpm/3000rpm-OPT
Bar capacity	45mm(1.77")	52mm(2.04")/75mm(2.95")	75mm(2.95")/90mm(2.54")
Chuck size	6��	8"/10"-OPT	10"/12"-OPT
X axis	125+25mm(4.9"+1")	160+25mm(6.2"+1")	240+25mm(9.44"+1")
Z axis	275mm(10.82")	540mm(21.25")	730mm(28.7")/1240(48.8")-OPT
Rapid traverse-X axis	15m/min(590ipm)	15m/min(590ipm)	15m/min(590ipm)
Rapid traverse-Z axis	30m/min(1181ipm)	30m/min(1181ipm)	30m/min(1181ipm)
Turret	hydraulic	hydraulic	hydraulic
Number of tools	8	8/12	8/10/12
Tools shank	20mm(0.78")	25mm(1")	25mm(1")
Boring bar size	25mm(1")	32mm(1.25")	40mm(1.57")
Tailstock body travel	350mm(13.77")	330mm(12.99")	830mm/1330mm-OPT
Quill travel	60mm(2.36")	75mm(2.95")	100mm(3.93")
Quill diameter	70mm(2.75")	70mm(2.75")	80mm(3.14")
Quill taper	MT#4	MT#4	MT#5
Spindle motor(30min/cont)	�\C6=5.5/7.5kw	�\C8=7.5/11kw	�\C12=7.5/11kw
Servo motor	FANUC �\ C6/2000/0.6KW	�\C6=0.6KW	�\C12=1.0kw
Floor space	1800x1300x1700	2300x1600x1700	2800x1900x1700
Machine weight	2000kgs	2500kgs	3300kgs

•The above specifications subject to change without prior notice.

CONTROL SPECIFICATION
LT-05	FAGOR 8055i-A	FANUC 0iTC	Siemens 810D
Spindle motor model	FM7 A075	�\ i 8	1PH7103-2NG00-0CA0
Spindle motor	7.5/11kw (47.7Nm)	7.5/11kw (47.7Nm)	7.5/9.3kw (33.4Nm)
X & Z Servomotor model	FXM 33.30A(7.3Nm)	�\ is8(8Nm)	1FK7063-5AF71-1AG0

LT-06	FAGOR 8055i-A/PLUS	FANUC 0i TC	Siemens 810D
Spindle motor model STD.	FM7 A110	�\ i 12	1PH7133-2NF00-0BA0
Spindle motor STD.	11/15.5kw (70Nm)	11/15.5kw (70Nm)	12/16kw (114.6Nm)
Spindler motor model OPT.	FM7 A150	�\ 15iP
Spindle motor OPT.	15/22 kw (95.5Nm)	15/18.5Kw (95.4Nm)
X & Z Servomotor model	FXM 54.30A (11.9Nm)	�\ is12 (12Nm)	1FK7083-5AF71-1AGO

LT-06	FAGOR 8055i-A/PLUS	FANUC 0i TC	Siemens 810D
Spindle motor model STD.	FM7 B220	�\ 22iP	1PH7163-2NF02-0CA0
Spindle motor STD.	22/23kw (210Nm)	11/15kw (140Nm)	22/27kw (210.1Nm)
Spindler motor model OPT.		�\ 30iP
Spindle motor OPT.		15/18.5Kw (249Nm)
X & Z Servomotor model	FXM 73.30A (20.8Nm)	�\ is22	1FK7101-5AF71-1AG3

LT - 05	LT - 06
LT - 08	LT - 08M