|| GENERAL || PRINCE || STUDTURN || CHAMPION || MAJOR || ACCESSORIES ||

GENERAL.

FEATURES:

  • Very rigid, solid construction allows heavy duty machining
  • Two grouped change levers for 4 spindle speeds in geometric progression selection from 10 to 1400 rpm
  • Inverter Brake system with Electric Brake
  • "One-shot" lube pump on saddle provides excellent slideways central lubrication
  • Feed rod equipped with overload clutch for safety
  • Both axes rapid power feed fitted for quick positioning
  • Wedge nut cross slide backlash adjustment
  • Totally enclosed universal gearbox provides a comprehensive range of metric, withworth, M.P. & D.P. threads
  • Simple, fast, pull up engage, push down disengage, feed control lever
  • Front removable chip trolley allows easy chip cleaning
  • Main Spindle supported by three precision bearings
  • Leadscrew with full length steel cover
  • Rigid tailstock with two speed quill plus rack & handle positioning
  • VS model equipped with Yaskawa varispeed 616G7(15KW), high performance, low noise, general purpose vector inverters or equivalent

MACHINE SPECIFICATION

Unit:mm(inch)

SERIES
  GENERAL 2600  GENERAL 3000 
MODELS  2660,2680,26120,26160 3060,3080,30120,30160
Centre height 330(13) 380(15)
Swing over bed 660(26) 760(30)
Swing over cross slide 460(18) 560(22)
Swing in Gap 860(33.85) 960(37.80)
Distance between centres 1500(60) 2000(80) 3000(120) 4000(160) 
Gap width in front of faceplate 300(11.8)
Spindle nose (Camlock) D1-11(A-2-11 Option)
Spindle bore 105(4.125)
Varispeed Gear steps 4
Range(RPM) 10-1400
Spindle nose bush MT. No8
Spindle centre MT. No6
Tailstock centre MT. No6
Width of bed 480(18.9)
Length of bed 3015(118) 3515(138) 4530(178) 5545(218)
Cross slide travel 330(13) 380(15)
Top slide travel 250(10)
Tailstock spindle travel 300(12)
Tailstock barrel diameter 105(4.13)
No. of whitworth threads 45
Range of whitworth threads(Optional) 2-72T.P.I
No. of metric threads 39
Range of metric threads (Optional) 0.2-14mm
No. of Diametral pitch threads 21
Range of D.P. thread (Optional) 8-44D.P.
No. of Module pitch threads 18
Range of Module pitch theads (Optional)

0.3-3.5mm
Longitudinal feeds (Optional) 0.04-1.0(0.0015-0.04)
Rapid Feeds:6.5M/min.
Cross feeds (Optional) 0.02-0.5(0.0008-0.02)
 Main motor  Standard 15KW(20HP)
Optional 22.5KW(30HP)
Packing sizes Length 4000(160)/4500(180)/5500(220)/6520(260)
Width 1910(76.4)
Height 1910(76.4) 2120(84.8)CE
Net weight(Approx. kgs.)  3800/4300/5400/6500 4000/4500/5600/6700
Gross weight (Approx. kgs.)  4300/5000/6000/7200 4500/5200/6200/7400