JESCO MACHINERY LTD.

FEATURES

16 spindle speeds in geometric progression selection from 53 to 2000 rpm.
The universal gearbox allows you to cut comprehensive Metric, Whitworth, Mod. and D.P. threads with simple conversion change gears.
D1-4 camlock spindle nose or DIN 55027.
Feed rod is equipped with overload clutch for safety.
Easy longitudinal & cross feed change operated by push/pull plunger on apron.
Totally enclosed oil bath, universal gearbox.
Safety guards on chuck and carriage.
Massive bed is scientifically ribbed, and stress relieved to maintain lifetime accuracy.
Optional single phase motor is available.
Optional variable speed is availogle.

Standard Equipment:

•Center Bush

•Toolbox & Tools

•2 x MT. No. 3 Centers

•Traveling Chip Guard

•Foot Brake

•Thread Indicator

•Splash Guard

•4 ways Toolpost

•Interlocked Chuck
¡Guard

•Coolant system

•Low Voltage Control

•Longitudinal over travel ¡Protation

•Instruction & Parts ¡Manual

•Cover of Lead screw

•Front moveable Chip tray

•Lockable Tool Drawers

CAPACITY AND SPECIFICATION

Unit:mm(inch)

MODELS	1330	1340	1430	1440
Center height	165(6.5")	165(6.5")	180(7")	180(7")
Bed length, distance between centers	750(30")	1000(40")	750(30")	1000(40")
Swing over bed	330(13")	330(13")	360(14")	360(14")
Swing over cross slide	190(7.5")	190(190")	212(8.5")	212(8.5")
Swing in Gap	495(19.5")	495(19.5")	520(20.5")	520(20.5")
Spindle nose (Camlock)	D1-4	D1-4	D1-4	D1-4
Spindle bore	35(1.375")	35(1.375")	35(1.375")	35(1.375")
No. of spindle speed (speed range)	16(53~2000rpm)	16(53~2000rpm)	16(53~2000rpm)	16(53~2000rpm)
No. of spindle speed (speed range)(vs optional)	2(40~2500rpm)	2(40~2500rpm)	2(40~2500rpm)	2(40~2500rpm)
Spindle nose bush	MT. No 4	MT. No 4	MT. No 4	MT. No 4
Spindle center	MT. No 3	MT. No 3	MT. No 3	MT. No 3
Tailstock center	MT. No 3	MT. No 3	MT. No 3	MT. No 3
Width of bed	190(7.5")	190(7.5")	190(7.5")	190(7.5")
Cross slide travel	190(7.5")	190(7.5")	190(7.5")	190(7.5")
Top slide travel	90(3.5")	90(3.5")	90(3.5")	90(3.5")
Tailstock quill travel	110(4.375")	110(4.375")	110(4.375")	110(4.375")
Tailstock barrel dia	40(1.56")	40(1.56")	40(1.56")	40(1.56")
No. of whitworth threads	47	47	47	47
Range of whitworth threads	4~144T.P.I.	4~144T.P.I.	4~144T.P.I.	4~144T.P.I.
No. of metric threads	44	44	44	44
Range of metric threads	0.2~14mm	0.2~14mm	0.2~14mm	0.2~14mm
No. of D.P. threads	30	30	30	30
Range of D.P. threads	8~88D.P.	8~88D.P.	8~88D.P.	8~88D.P.
No. of Module pitch threads	30	30	30	30
Range of Module pitch theads	0.3~7mm	0.3~7mm	0.3~7mm	0.3~7mm
Longitudinal feeds	0.02~1.04mm 0.0008~0.041"	0.02~1.04mm 0.0008~0.041"	0.02~1.04mm 0.0008~0.041"	0.02~1.04mm 0.0008~0.041"
Cross feeds (1/3 of longitudinal feeds)	0.006~0.346mm 0.00026~0.0136"	0.006~0.346mm 0.00026~0.0136"	0.006~0.346mm 0.00026~0.0136"	0.006~0.346mm 0.00026~0.0136"
Main motor (4/8 poles 2 speeds)(standard)	2.25/1.12kw (3/1.5HP)	2.25/1.12kw (3/1.5HP)	2.25/1.12kw (3/1.5HP)	2.25/1.12kw (3/1.5HP)
Main motor (6 poles)(vs optional)	1.5kw(2HP)	1.5kw(2HP)	1.5kw(2HP)	1.5kw(2HP)

•The above speciations subject to change without prior notice.