JAGUAR ENC (Teach-In) Lathe

Model : 32" / 40" ENC Series

  • The rigid construction bed are induction hardened over HRC50 and precision ground provides heavy duty turning and fine finishing at high accuracy .
  • The main spindle is supported by selected and preloaded super precision bearings to ensure high accuracy through full speed ranges.
  • The main spindle, shafts and gears in the headstock are made by high grade alloy steel, are hardened and precision ground for high speed running at lower noise level.
  • The automatic lubrication pump equipped on apron provides all slide-ways and two axes ballscrews lubricants continually.
  • The hardened and precision ground ballscrews for X & Z axes are mounted on high precision bearings to enable sensitive movement.
  • Both X & Z axes equipped with individual electronical handwheels on control panel for manual operation as conventional lathes.
  • Full length rear splash guard and front moveable chip trolley provides chip and coolants safety and easy clean.
  • A designed openable door on rear splash guard provide for X-Axis and home switches maintanence and adjustment easily.
  • Both X & Z axes are equipped with selected controller whole package AC servo motors with its own power supply and monodrives.
  • The EUCHNER automation sensor equipped on spindle speed changer to provide the exactly positions of speed range for spindle infinitely variable speed selection correctly.
  • Electric positional stops in X & Z axes and tailstock to avoid any over travels. The modular input/output card evidence all control system performance for maintanence and trouble shooting easily

32-40enc_b.jpg

Unit: mm(inch)
MODELS 3250/3280/32120/32160/32200/32240 4050/4080/40120/40160/40200/40240
Swing over bed 800 1000
Swing over cross slide 510 710
Distance between centres 1200/2000/3000/4000/5000/6000
Spindle nose A2-11 A2-15 A2-20 A2-20
Spindle bore 155 250 305 380
Tailstock spindle travel 275
Tailstock barrel diameter 125


  FAGOR 8055i-A FANUC 0i-TD SIEMENS 810D
X-Axis Servo Motor FKM44 (11.6Nm) βis12 (11Nm) 1FK7062 (8.5Nm)
Z-Axis Servo Motor FKM64 (16.5Nm) βis22 (20Nm) 1FK7084 (20Nm)
Main Spindle Motor FM7-A220 (22/30kw) αi22 (22/26kw) 1PH8137 (22kw)

Standard Equipment:

  • Automatic lubrication pump for slideways and ballscrews
  • Automatic spindle speed gear change
  • Cutting fluid coolant system
  • Headstock/Gearbox oil cooler design
  • Full length rear splash guard
  • Full enclosed end guard
  • Working light
  • Chain type chip conveyor
  • RS-232 port
  • Leveling blocks
  • Service tools & toolbox
  • Instruction & parts manual

Optional Accessories:

  • Manual Type 3-Jaw/4-Jaw Chuck
  • Front mounting Elec. 8-station automatic tool changer turret
  • Hydraulic tailstock
  • Rotating center
  • Roller type steady rest
  • Roller type follow rest
  • Special functions by consult

Related Products

JAGUAR ENC (Teach-In) Lathe

JAGUAR ENC (Teach-In) Lathe

JAGUAR ENC (Teach-In) Lathe

JAGUAR ENC (Teach-In) Lathe

JAGUAR ENC (Teach-In) Lathe

JAGUAR ENC (Teach-In) Lathe