JAGUAR ENC (Teach-In) Lathe

Model : 32" ENC Series

  • The rigid construction bed are induction hardened over HRC50 and precision ground provides heavy duty turning and fine finishing at high accuracy .
  • The main spindle is supported by selected and preloaded super precision bearings to ensure high accuracy through full speed ranges.
  • The main spindle, shafts and gears in the headstock are made by high grade alloy steel, are hardened and precision ground for high speed running at lower noise level.
  • The automatic lubrication pump equipped on apron provides all slide-ways and two axes ballscrews lubricants continually.
  • The hardened and precision ground ballscrews for X & Z axes are mounted on high precision bearings to enable sensitive movement.
  • Both X & Z axes equipped with individual electronical handwheels on control panel for manual operation as conventional lathes.
  • Full length rear splash guard and front moveable chip trolley provides chip and coolants safety and easy clean.
  • Both X & Z axes are equipped with selected controller whole package AC servo motors with its own power supply and monodrives.

enc-32.jpg
 

Unit: mm(inch)
MODELS 3260/3280/32120/32160/32200/32240
Swing over bed 800(32)
Swing over cross slide 610(24)
Distance between centres 1500(60)/2000(80)/3000(120)/4000(160)/5000(200)/6000(240)
Spindle nose D1-11(A2-11) A2-11 A2-15
Spindle bore 104 155 230
Tailstock barrel travel 300(12)
Tailstock barrel diameter 105(4.125)


Standard Equipment:

  • Automatic lubrication pump for slideways and ballscrews
  • Automatic spindle speed gear change
  • Cutting fluid coolant system
  • Full enclosed end guard
  • Headstock/gearbox oil cooler design
  • Working light
  • Leveling blocks
  • Centers & center sleeve
  • Service tools & toolbox
  • Instruction & parts manual

Optional Accessories:

  • Manual type 3-jaw scroll chuck
  • Manual type 4-jaw independent chuck
  • Hydraulic tailstock
  • DIXON quick change toolpost
  • Elec.4-way toolpost
  • Elec.8-station turret (Front Mounting)
  • Hydraulic tailstock
  • Steady rest
  • Follow rest
  • Chain type chip conveyor with cart
  • C-axis with live turret
  • Special functions by consult

Related Products

JAGUAR ENC (Teach-In) Lathe

JAGUAR ENC (Teach-In) Lathe

JAGUAR ENC (Teach-In) Lathe

JAGUAR ENC (Teach-In) Lathe

JAGUAR ENC-HS Lathe

JAGUAR ENC-HS Lathe

JAGUAR ENC-HS Lathe

JAGUAR ENC-HS Lathe

JAGUAR ENC-HS Lathe

JAGUAR ENC-HS Lathe

JAGUAR ENC (Teach-In) Lathe

JAGUAR ENC (Teach-In) Lathe