Model :
EZI-TURN 390
- The headstock is built with induction hardened and precision ground gears.
- Main Spindle support by two precision taper roller bearings to ensure spindle rigidity and concentricity.
- High pressure oil lubrication is provided to all gears and bearings.
- Built and guarded to comply with the latest CE regulations to ensure complete operator safety.
- Front moving chip-tray makes light work of swarf removal and reduces the amount of space required at the rear of the machine.
- FANUC 0i-TF PLUS is built in software: Turn Mate I, Manual Guide I and APP developed by JESCO. This software, JESCO-APP is developed using FANUC PICTURE and designed specifically for the 0i-TF PLUS controller. It aims to reduce user learning costs and improve operational efficiency through an intuitive teach pendant interface.
| MODEL | EziTurn 390 |
| CAPACITY | |
| Swing over bed | 390mm |
| Swing over cross slide | 220mm |
| Distance between center | 709mm / 1206mm |
| HEADSTOCK | |
| Spindle nose | D1-6 (A2-6) |
| Spindle bore | 54mm |
| Spindle speeds: | 60-3000 rpm (1-Step) |
| Spindle nose bush | MT6 x MT4 |
| TAILSTOCK | |
| Quill travel | 120mm |
| Quill diameter | 58.5mm |
| Quill taper | MT4 |
| BED | |
| Bed width | 270mm |
| Max. longitudinal travel | 420mm / 920mm |
| Max. turning length | 370mm / 870mm |
| BALLSCREW | |
| X-Axis Ballscrew Dia. | 20 x P5 |
| Z-Axis Ballscrew Dia. | 32 x P5 |
| GENERAL INFORMATION | |
| Overall length | 2548 / 3045 |
| Overall width | 1792 |
| Overall height | 1675 |
| Weight (Approx. kgs) | 1500/1800 |