Model : Model : 32" / 40" ENC Series

Q'ty :

The rigid construction bed are induction hardened over HRC50 and precision ground provides heavy duty turning and fine finishing at high accuracy.
The main spindle is supported by selected and preloaded super precision bearings to ensure high accuracy through full speed ranges.
The main spindle, shafts and gears in the headstock are made by high grade alloy steel, are hardened and precision ground for high speed running at lower noise level.
The automatic lubrication pump equipped on apron provides all slide-ways and two axes ballscrews lubricants continually.
The hardened and precision ground ballscrews for X & Z axes are mounted on high precision bearings to enable sensitive movement.
Both X & Z axes equipped with individual electronical handwheels on control panel for manual operation as conventional lathes.
Widely & semi-enclosed front chuck & chip guard equipped with interlock switches according to EC regulation provides safety and easy operation.
Full length rear splash guard and front moveable chip trolley provides chip and coolants safety and easy clean ..A designed openable door on rear splash guard provide for X-Axis and home switches maintanence and adjustment easily.
Both X & Z axes are equipped with selected controller whole package AC servo motors with its own power supply and monodrives.
The EUCHNER automation sensor equipped on spindle speed changer to provide the exactly positions of speed range for spindle infinitely variable speed selection correctly.
Electric positional stops in X & Z axes and tailstock to avoid any over travels. The modular input/output card evidence all control system performance for maintanence and trouble shooting easily

MODEL		3280/32120/32160/32200/32240			4080/40120/40160/40200/40240
CAPACITY
Swing over bed		800mm			1000mm
Swing over cross slide		510mm			710mm
Swing in gap		1100mm			1300mm
Center height		400mm			500mm
Distance between center		2000mm(80”)/3000mm(120”)4000mm(160”)/ 5000mm(200”)/6000mm(240”)
HEADSTOCK
Spindle bore		155mm	250mm	305mm	155mm	250mm	305mm	380mm
Spindle nose		A2-11	A2-15	A2-20	A2-11	A2-15	A2-20	A2-20
Spindle range		3	3	3	3	3	3	3
Spindle speed (rpm)	1-range	9-170	4-73	4-73	9-170	4-73	4-73	4-73
	2-range	171-470	74-200	74-200	171-470	74-200	74-200	74-200
	3-range	471-1400	201-600	201-600	471-1400	201-600	201-600	201-600
BALLSCREW
Z axis ball screw		∅63 x P10
X axis ball screw		∅40 x P5
CARRIAGE
Cross slide width		300mm
Cross slide travel		500mm
BED
Bed width		560mm
Z axis travel		1820/2820/3820/4820/5820 mm
TAILSTOCK
Quill taper		MT6
Quill diameter		125mm
Quill travel		275mm
BALLSCREW					CARRIAGE
Z axis ball screw		∅63 x P10			Cross slide width		300mm
X axis ball screw		∅40 x P5			Cross slide travel		500mm
BED					TAILSTOCK
Bed width		560mm			Quill taper		MT6
Z axis travel		1820/2820/3820/4820/5820 mm			Quill diameter		125mm
					Quill travel		275mm