Model : Model : 30LS Series

Q'ty :

The rigid construction bed are induction hardened over HRC50 and precision ground provides heavy duty turning and fine finishing at high accuracy.
The main spindle is supported by selected and preloaded super precision bearings to ensure high accuracy through full speed ranges.
The main spindle, shafts and gears in the headstock are made by high grade alloy steel, are hardened and precision ground for high speed running at lower noise level.
The automatic lubrication pump equipped on apron provides all slide-ways and two axes ballscrews lubricants continually.
The hardened and precision ground ballscrews for X & Z axes are mounted on high precision bearings to enable sensitive movement.
Both X & Z axes equipped with individual electronical handwheels on control panel for manual operation as conventional lathes.
Widely & semi-enclosed front chuck & chip guard equipped with interlock switches according to EC regulation provides safety and easy operation.
Full length rear splash guard and front moveable chip trolley provides chip and coolants safety and easy clean ..A designed openable door on rear splash guard provide for X-Axis and home switches maintanence and adjustment easily.
Both X & Z axes are equipped with selected controller whole package AC servo motors with its own power supply and monodrives.
The EUCHNER automation sensor equipped on spindle speed changer to provide the exactly positions of speed range for spindle infinitely variable speed selection correctly.
Electric positional stops in X & Z axes and tailstock to avoid any over travels. The modular input/output card evidence all control system performance for maintanence and trouble shooting easily

MODEL	3060LS/3080LS/30120LS/30160LS/30200LS/30240LS
CAPACITY
Swing over bed	800(32)
Swing over cross slide	608(24)
Swing in gap	1090(42.91)
Distance between center	1500(60)/2000(80)/3000(120)/ 4000(160)/5000(200)/8000(240)
Gap width from faceplate	300(11.8)
HEADSTOCK
Spindle nose	A2-11	A2-11	A2-15
Spindle bore	104	155	230
Spindle speeds: Low range	26-224	30-172	4-73
Spindle speeds: Medium range	225-670	173-517	74-200
Spindle speeds: High range	671-2000	518-1400	201-600
Spindle nose bush	MT8 x MT6	-	-
TAILSTOCK
Quill travel	300(12)
Quill diameter	105(4.125)
Quill taper	MT6
BED
Bed width	480(18.9)
Max. longitudinal travel	1190(46.8)/1700(67)/2710(106.7)/ 3730(146.8)/4730(186.8)/5730(226.8)
Max. turning length	1140(44.8)/1650(65)/2660(104.7)/ 3680(144.8)/4680(184.8)/5680(224.8)
BALLSCREW
X-Axis Ballscrew Dia.	32 x P5
Z-Axis Ballscrew Dia.	50 x P10
GENERAL INFORMATION
Overall length	4200(165)/4700(185)/5700(224)/ 6700(264)/7700(304)/8700(344)
Overall width	2250(88)
Overall height	2260(88)
Net weight (Approx. kgs)	5000/5500/6700/7900/9100/10300
Gross weight (Approx. kgs)	5600/6200/7500/8900/10100/11300